.jpg)
.png)
.jpg)
.png)
.jpg)
Feature:
Four working modes: Turbo, Normal, Ortho, Soft, Pulse
Time setting:
Turbo: 3S, 5S
Ortho: 3Sx10, 5sx10
Normal, Soft, Pulse: 5S, 10S, 20S
Contstant light intensity. Solidification effect is not effected by the consumption of remaining power
Large capacity battery. A full charge can be used for more than 300 times continuously under 10s working time mode
B-Cure adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time
This product is used for dentistry. It has the function of accelerating the material of dental restoration curing
2 Chargers Included
Three Built in LED's in one light, which can achieve an optimal broadband spectrum of 385 to 515nm
The light absorbing peak of traditional material including camphorquinone: the red line on the figure is 460nm, so the curing can be done by either general curing light or wide spectrum curing light
5W high power blue light LED.
Light Intensity :1000-2000mW/cm2;
Wave Length: 385nm-515nm
Curing normal resin that is thicker than 2mm in three seconds.
Play an important role in cementation of all ceramic restoration and orthodontic bracket. In the ortho mode that is unique to B-Cure,the light intensity automatically conduct 10 circles of curing with interval of 1s.
One operation can basically finish the cementation of 2 to 3 brackets, which reduces operations and improves efficiency.
Under soft mode, the power of LED gradually increases, giving a longer gel period for resin to reduce the edge discomfort caused by stress contraction of resin.
Can be autoclaved under 134 degrees Celsius high temperature and 0.22MPa high pressure
Warranty: One Year! Service: Whole Life!
